lids after ignition on).ģ Symbol for “Factory settings”,shows the factory setting of the functionĤ Tick – the green tick shows the selected setting of the function,the gray tick shows the active setting of the functionĥ “Factory settings” button,establishes the factory settings for the vehicle and keysĦ “Cancel all” button,cancels all settings unlocking rear window, boot/rear lid) and an optional subgroup (e.g. The CKM functions are divided into a maximum of three levels of hierarchy. The factory setting is represented by a corresponding symbol next to the parameter keyword. Key functions can be set individually for the max. The current setting is shown by a selected checkbox next to the parameter keyword and can be changed by the service technician. active, inactive) are assigned to a function or a function keyword.
The basic prerequisite is that all control modules on a vehicle are programmed to the current software status: The procedure for programming the Vehicle and Key Memory is described below. On these model series, all Vehicle and Key Memory functions are programmed directly in the vehicle (please refer to “Personal Profile” in the Owner’s Manual: individual settings for a maximum of 3 remote control units via the display in the instrument cluster or via the Central Information Display).īMW E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E83, E85 and E86 MINI R50, R52 and R53 Rolls-Royce Before replacing a control module, the CKM settings in the vehicle must be printed out so that these can be restored after the control module has been replaced.īMW E70, E71, E81, E82, E87, E88, E90, E91 E92, E93, F01 F02 MINI R55 and R56 When replacing control modules, it may happen that individual data in the CKM settings are not automatically restored.